Blown alky 5.7 vvt project

-
Badasspullin

Badasspullin

Member
Joined
Dec 28, 2014
Messages
20
Reaction score
2
Location
Mclean sask
image.jpeg
ok well 2 yrs running my twin 2010 5.7 vvt motors with dual carbs is coming to a close for the year of tractor pulling. To let everyone know these engines are bone stock from wrecked trucks. Intake changed to edlebrock duals. Custom ign. That is all that has been done to theses engines. They run great pulling 7200 down the track. With close to 100 runs on them. By my research these are the only 2 known 2010 vvt hemis running with carbs and msd
While these engines run great u ask why do any more. Need more power(rrrrrr). So we are in process of putting 6-71 blowers on them ( completely stock to see how far we can push them)
So far have tracked down manifold , blower, alky injection
I am needing some input on crank hub and fuel pump drive or if anyone knows where to source them if not back to making custom parts
 
I have nothing to add but I love what you're doing! What blower manifold(s) are you going to be running?
 
so you are going too have TWO blown hemis and I have none?
where's Bernie when you need him?
:poke:
 
You must log in or register to reply here.
-

Back
Top