bolt list

-
D

dbednarsky

Active Member
Joined
Nov 12, 2010
Messages
25
Reaction score
0
Location
Stratford, CT
I am hoping some of you can help. Does anyone have a complete list of what bolts are need for a 318 motor. It came out of a 73 satelitte and is going into my 66 dart, but I need to finish assembly, and want to get new hardware, some I already have the rest I am going to peice together. But I don't have a list of exactly whats needed and the correct sizes. I know they are all 3/8 or 5/16 but how many of each and what lengths etc. I will appreciate any help. Thanks guys
 
I copied and saved this a while back, courtesy of 340SIX. Hope it helps.

Small Block bolt sizes

oil pan
5/16"{18}x 3/4" amount needed 18
valve covers
1/4"{20}x3/4" amount needed 10

fuel pump
3/8"{16}x1 1/2" amount needed 2

thermostat housing
3/8"{16}x1" amount needed 2

intake manilofld
3/8"{16}x1 1/2" amount needed 12

water pump & timming cover as a combo-set
3/8"{16}x5" amount needed 4
3/8"{16}x3 3/4" amount needed 3
3/8"{16}x1" amount needed 3
3/8"{16}x2" amount needed 1

distibuter hold down
5/16{18}x 3/4" amount needed 1

Don't forget the washers to go with the bolts.
*********************************************
info provided by 340SIX
 
Glad to share it, but 340SIX should get a pat on the back. There's a lot of good info that gets shared here. I'm a packrat, and copy and save anything that I think I might need later. :-D
 
You must log in or register to reply here.
-

Back
Top