I am planning on replacing the front brake hoses on my 71 Duster with a 73 disc brake conversion kit with steel braided hoses. Would anyone happen to know what size fittings are on the ends? The ones I am looking at are Russell and I think the correct ones would be with a 10mm banjo fitting but I am not sure of what the female threaded end is. Thanks.
Brake Hoses
- Thread starter jar84203
- Start date
-
Should be 3/16 line size,the caralogs should refer to it as 3/8-24.The 3/8 is the width of the threaded part.24 is thread per inch.
So I take it this hose won't work? Russell part #657243
http://www.russellperformance.com/mc/brake_hoses/universal.shtml
http://www.russellperformance.com/mc/brake_hoses/universal.shtml
Should,3an is the same as 3/16,for the most part.Call edelbrock tech line if you worry at all,they own russell now.
A an size is the same as a 1/16 of a inch,roughly.
-
