Mgc340
Well-Known Member
Fresh set of Brodix B1BA heads
New Manley valves
2.05 intakes
1.65 exhaust
Fresh valve job
These heads were originally done by sd-concepts.com for a boosted application.
68cc
Port matched M1 intake manifold
These heads have a dual header flange pattern, one is the stock LA pattern
These heads use a small block Chevy rocker arm
Used nice set of small block Chevy 1.5 ratio rockers arms with a spare half set included
The springs on the heads are pretty weak. Included is a nice used set of Springs good to .750 lift
These heads would make a killer little 59’ drag motor for someone
Asking $2,600 plus shipping and PayPal fees
Pm for more questions
New Manley valves
2.05 intakes
1.65 exhaust
Fresh valve job
These heads were originally done by sd-concepts.com for a boosted application.
68cc
Port matched M1 intake manifold
These heads have a dual header flange pattern, one is the stock LA pattern
These heads use a small block Chevy rocker arm
Used nice set of small block Chevy 1.5 ratio rockers arms with a spare half set included
The springs on the heads are pretty weak. Included is a nice used set of Springs good to .750 lift
These heads would make a killer little 59’ drag motor for someone
Asking $2,600 plus shipping and PayPal fees
Pm for more questions
