C Body spindles work for brake conversion?

[Dead End Kid1]

I always see the B,F,J,M, and R spindles as viable candidate's, but don't see C body spindles mentioned. I've found a Gran Fury and I.D. chart identifies this as a C body. Any chance these will work?

 

[hellion_locdogg]

I think the are quite a bit taller.

 

[efriedrich]

The 75-77 Gran Fury's were C bodies which you don't want. The 80-81 Gran Fury's were R bodies and the 82-89 Gran Fury's were M bodies which will both work for A bodies.

 

[needsaresto]

In a word,no. They are just too tall,but the M body spindles do bolt up. I have a pair of large late model c body rotors/spindles which I might try to mock up and use as rear discs on an 8 3/4,as well as a set of M body front brake/spindles.

 

[Dead End Kid1]

Glad I asked. Thx. Guess I get to go back to bed. kinda a bummer...1/2 price at the local Pick-A-Part, and that was the only Mopar that was close.