C channel window felt guide material

-
4

4 speedin

Well-Known Member
Joined
Aug 4, 2014
Messages
434
Reaction score
117
Location
california
I am doing a complete resto on my 68 Valiant two door post. I am looking for the insert channel that runs the full length of the window channel, Also looking for the material that goes between the vent window frame and the door frame as well as the thin rubber sleeve channel for the vent glass channel and between the door glass and the channel piece that fastens to the door glass front and rear. Can anyone help please
 
I bought my kit from restoration specialties. He has everything for Valiant sedans
 
We have available a kit to do the rear quarter glass and front door glass. The rear quarter glass takes two different profiles. The front door requires one profile plus the division bar liner. These kits are flocked as originals and duplicates the original profiles. If you need more information, drop me a message.
 
Not on sedans. The rear 1/4 glass uses all the same size glass run. The fronts use 2 different ones. A thin styyle goes on the wing window frame and a thicker one for the upper glass run and rear glass run. I just replaced all of mine in my 67 Valiant 2dr.
 
Sedanman said:
Not on sedans. The rear 1/4 glass uses all the same size glass run. The fronts use 2 different ones. A thin styyle goes on the wing window frame and a thicker one for the upper glass run and rear glass run. I just replaced all of mine in my 67 Valiant 2dr.
Click to expand...
Thank you all much for your help! I will start with restoration specialists and go from there.
 
If you need any assitance in the install feel free to PM me and I'll walk you through it. I bought my door and rear glass seals from him too.
 
You must log in or register to reply here.
-

Back
Top