[SOLD] Callies 3.79 4340 Forged crank 340 main

[Swingin1970]

Callies 4340 forged steel crank 3.79 stroke, 2.100 rods and standard 340 mains. Dual pattern flange 6 or 8 bolt. QMP just inspected and polished the crank clean bill of health ready to run. Asking $950.00

 

[Swingin1970]

Willing split shipping. Need this crank out of the shop.

 

[Moparpuller]

Willing split shipping. Need this crank out of the shop.

Do you have an r block to go with it?

 

[Swingin1970]

I might be selling my current R3 block, 9.0 deck, siamese, 4.185 bores, 48 degree. Going aluminum Ritter.

 

[Moparpuller]

I might be selling my current R3 block, 9.0 deck, siamese, 4.185 bores, 48 degree. Going aluminum Ritter.

How much for the block and crank. Do you have the timing cover

 

[Swingin1970]

No timing cover as we ran a jesel belt drive. Block is currently at QMP for fresh machining, block has .904 lifter bushing installed, 60mm cam tunnel with roller cam bearings, can go 4.220 bore currently 4.185, external oiling. Asking $4500 for the block and $950 for the crank.

 

[9secRR]

Do you have the rods that was used with this crank?

 

[Swingin1970]

Yes I do. CP Carillo H beam 5.900" (paid $2,700 for the set)