Can i use this with my disc brakes?

-
amzchad

amzchad

Well-Known Member
Joined
Mar 15, 2009
Messages
656
Reaction score
1
Location
California
I am looking into the adjustable knob style willwood disc brake proportioning vaulve i have the sbp four piston disc brakes up front and drums on the 8 3/4 in the back

Will this work

Thanks

Chad
 
Depends? Why are you adding the valve? Have you converted over to the 4 piston brakes and don't have a stock proportioning valve, or is that the stock set up and you're looking for a better front/rear bias?
 
the car came with these brakes stock as far as i know i want to be able to adjust my brake presure from front to rear
 
I converted to KH disc up front, and I am using the Wilwood valve for front/rear bias.

It is a simple install, just make sure you double flare your lines in and out.
 
I have one on my car and it works fine, but I don't have any other proportioning valve.

I would suggest removing your stock one or your not going to have the adjustment range. If you don't, the only thing the adjustable valve will give you is the ability to reduce the rear braking from stock.
 
You must log in or register to reply here.
-

Back
Top