Hi,
Im currently putting my 408 stroker together and Im not sure wich carb to use?
Car is a 1974 Plymouth scamp.
My setup is:
1976 360 block 0.30 over
Scat cast steel crank
Scat I-beam rods
+5cc flattop pistons
windage tray
Melling HV oil pump
Rapom alu heads 2.02 intake 1.60 exhaust valves 65cc
Comp hydraulic flattapped xe274 cam
Edelbrock air-gap intake
about 10.6 to 1 compression
Hughes 2500 stall converter
TF-904 reverse full manual valve body
8 3/4 with 3.23 to 1
I have an 650cfm Holley DP but i think it will be too small?
Car is only for street use.
Thanks
Laurin
Im currently putting my 408 stroker together and Im not sure wich carb to use?
Car is a 1974 Plymouth scamp.
My setup is:
1976 360 block 0.30 over
Scat cast steel crank
Scat I-beam rods
+5cc flattop pistons
windage tray
Melling HV oil pump
Rapom alu heads 2.02 intake 1.60 exhaust valves 65cc
Comp hydraulic flattapped xe274 cam
Edelbrock air-gap intake
about 10.6 to 1 compression
Hughes 2500 stall converter
TF-904 reverse full manual valve body
8 3/4 with 3.23 to 1
I have an 650cfm Holley DP but i think it will be too small?
Car is only for street use.
Thanks
Laurin