When I started test assembling my Holley 4175 to my Edelbrock Performer 318/360 manifold, I noticed that the flange studs were hitting the fuel bowls because of how the bowl "overhangs"!
Seems like I could not find a suitable length stud anywheres locally. A parts guy told me that a spacer was required under carb and that would allow the studs he had to work.
Can I run Carb directly on manifold?
If so, all thread cut to desired length would suffice?
Thanks FABO
Seems like I could not find a suitable length stud anywheres locally. A parts guy told me that a spacer was required under carb and that would allow the studs he had to work.
Can I run Carb directly on manifold?
If so, all thread cut to desired length would suffice?
Thanks FABO