Carbs and linkage suggestions

[my5thmopar]

My engine is at the machine shop and Im collecting parts. I have traded for a Edlebrock performer 2176. Im thinking Edlebrock 600 but, open to suggestions. Engine has dual 2 1/2 exhaust stock manifolds and a mild cam (Not selected yet) What will I have to do with the linkage? Will I need an adapter, cables or some kind of kit. Is there a carb that works with the stock linkage. It is an AT car btw.

Thanks Craig

 

[oldkimmer]

.........Ebrock has the chrysler adapter u need, then u can use stock 4bbl linkage.....cant think of the # off hand.......kim........

 

[kt340sport]

If you are going to use a 600 edelbrock , the bracket for the side, for throttle pressure and cable is #1481 edelbrock lots on ebay.

 

[my5thmopar]

I have the choice of a Weiand Stealth 8022 or a Edelbrock Performer 2176. I'm not sure what carb yet. Stock 318 with a Comp x356H cam. Any thoughts or other Carb and intake suggestions. The car will have A/C if that matters.

Craig

 

[oldkimmer]

........the stealth is the better intake...........ur cam must be a 256?.....5-600 cfm is all u need......kim.......