57dodged100
Well-Known Member
Contact seller
Parts are from a 1968 Barracuda. This will allow any A-body '72 or older (with small upper ball joints and 14" small bolt pattern wheels) to upgrade to disk brakes. The only additional part you will need to source is a proportioning valve.
I recently completed this swap on my '72 Scamp and it is straight forward. If you want to learn about how to do this swap and get a list of part numbers check out this thread that I started:
http://www.forabodiesonly.com/mopar/showthread.php?t=266225
Included in this sale: left and right upper A-arms, spindles, lower control arms, backing plates and calipers (with hose brackets), 2 hubs and rotors.
I have dissembled the parts (cleaned with a wire brush) and placed them into 3 large USPS flat rate boxes for shipping ($53 shipping cost). Price is $390 for pick up in Southeast Ohio (45710), or $443 delivered to your door in the lower 48 states. I will accept a personal check (but wait for it to clear before shipping) or I can take Paypal. Please send me a private message if you interested in this purchase.
I recently completed this swap on my '72 Scamp and it is straight forward. If you want to learn about how to do this swap and get a list of part numbers check out this thread that I started:
http://www.forabodiesonly.com/mopar/showthread.php?t=266225
Included in this sale: left and right upper A-arms, spindles, lower control arms, backing plates and calipers (with hose brackets), 2 hubs and rotors.
I have dissembled the parts (cleaned with a wire brush) and placed them into 3 large USPS flat rate boxes for shipping ($53 shipping cost). Price is $390 for pick up in Southeast Ohio (45710), or $443 delivered to your door in the lower 48 states. I will accept a personal check (but wait for it to clear before shipping) or I can take Paypal. Please send me a private message if you interested in this purchase.