Console Bracket Dimension

[Jhenry70]

I've been able to get most all dimensions I need for making my own console brackets with the exception of the heights of the rear and forward brackets. Can someone measure and get me the dimensions for "A" and "B" in the posted picture? Any info is appreciated, Thanks!

 

[6pk2goDemon]

I can get you those measurements tomorrow if I can find the brackets....

 

[Jhenry70]

I can get you those measurements tomorrow if I can find the brackets....

Thank you!

 

[6pk2goDemon]

Here's the dimensions I came up with....They're a bit difficult to measure IMO

The U shaped forward bracket is 3 1/8" high on the left (driver) side & 2 3/8" on the right.

The rear bracket ends are cut on an angle also (to account for the curve of the hump). 2 1/8" on the left & 1 1/2" on the right.

 

[Jhenry70]

Here's the dimensions I came up with....They're a bit difficult to measure IMO

The U shaped forward bracket is 3 1/8" high on the left (driver) side & 2 3/8" on the right.

The rear bracket ends are cut on an angle also (to account for the curve of the hump). 2 1/8" on the left & 1 1/2" on the right.

This will get me in the ball park to start with and I can adjust as needed from there. Thank you so much for doing this, it's really appreciated!
Jerry