Correct Vacuum advance??

-
S

smoothcuda273

New Member
Joined
Mar 28, 2017
Messages
4
Reaction score
0
Location
Elk Grove
What's the correct vacuum advance for a stock 273,4bbl, on a 65 Cuda? Its the 4 speed manual. Specifically what number should be on the arm of the vac advance?
 
Rock auto shows VC155. According to this table from SMP, it should have a 10 stamped on it.

vac control.jpg
 
smoothcuda273 said:
What's the correct vacuum advance for a stock 273,4bbl, on a 65 Cuda? Its the 4 speed manual. Specifically what number should be on the arm of the vac advance?
Click to expand...
Is it the dual point? My dual point has 10 on the arm.

Jake
 
smoothcuda273 said:
Thanks! I'm going to pull it tomorrow.
Click to expand...
The original Chrysler part number for the HP dual point distributor vacuum advance was 1843034 then superseded by part number 1881757. Both numbers are hard to find and usually near $100 when found.
FYI....the 2 bbl advance will mount on the distributor, but the arm will not connect to the plate. Usually the aftermarket models do not fit as I discovered on my 65 FS with PO repairs.
The 1843034 advance has a fairly narrow application range: 1965-67 273 HP and 1957 Plymouth Fury and DeSoto Adventurer cars. No wonder they are hard to find.
Good luck on your search
 
pbiggs said:
The original Chrysler part number for the HP dual point distributor vacuum advance was 1843034 then superseded by part number 1881757. Both numbers are hard to find and usually near $100 when found.
FYI....the 2 bbl advance will mount on the distributor, but the arm will not connect to the plate. Usually the aftermarket models do not fit as I discovered on my 65 FS with PO repairs.
The 1843034 advance has a fairly narrow application range: 1965-67 273 HP and 1957 Plymouth Fury and DeSoto Adventurer cars. No wonder they are hard to find.
Good luck on your search
Click to expand...
Thank
 
You must log in or register to reply here.
-

Back
Top