srixon4406
TURBO TOAD
The stroker motor swap is well under way and im in need of couple things to keep me moving and maybe a member here can help me out.
1.Im looking for some header flanges that will work with 440-1 heads they must be atleast 3/8 thick, stainless or mild steel
2.arp or Manley head studs must have all the hardware for the heads listed above
3.msd crank trigger for a big block
4.14mm fuel injector port bit for the install of fuel injectors
Pm me if you have any of these parts and your intrested in selling them or possibly working out a trade for some extra parts i have paypal perfered and shipping would be to 49234
Thanks fabo for the ad
Aaron
1.Im looking for some header flanges that will work with 440-1 heads they must be atleast 3/8 thick, stainless or mild steel
2.arp or Manley head studs must have all the hardware for the heads listed above
3.msd crank trigger for a big block
4.14mm fuel injector port bit for the install of fuel injectors
Pm me if you have any of these parts and your intrested in selling them or possibly working out a trade for some extra parts i have paypal perfered and shipping would be to 49234
Thanks fabo for the ad
Aaron
