crank no start

[Dfr360cuda]

There's been a lot of good suggestions on what to look for and check, but the first thing I read that I disagree with is cleaning up a fouled plugs

I think you’re wrong.

 

[Dfr360cuda]

I think you’re wrong.

 

[Dan the man]

I think you’re wrong.

I'm not as far as cleaning up plugs

 

[Bewy]

Clean plugs with Lacquer Thinner & toothbrush. Good to go. But why were they fouled? good chance it is that shiny thing bolted to the intake with 4 bolts.....

 

[halifaxhops]

So I found that the wire that goes to the points from the coil was loose so I replaced the nut with a locking nut and got it to start it ran like crap and couldn’t time it in. Cool is new and it ohms out good it still seems like fire. I appreciate all the help here are some pics of what I am working with.

View attachment 1716254305

View attachment 1716254306



View attachment 1716254308

Just skimming this and saw the distributor is painted. Kind of a no no with points. You HAVE to have a good ground with a points dist or the timing will walk all over the place.