crank rods pistons???

[slyhog2007]

can you use a 4" stroke crank, stock 6.123 rods and kp107-30 pistons together and if so what the max lift i can use

 

[71DartGuy]

The compression height of the KB 107's is 1.675 while a stroker piston needed for a 4 inch stroke crank is around 1.465 (KB 745's). You'll have to pony up the extra dough if you want to build that stroker. I would think those 107's would stick WAYY out of the deck.

 

[fishy68]

I would think those 107's would stick WAYY out of the deck.

That's right. Almost a 1/4" out.