curious.....

[triggerjay]

I just set the duster back down, and noticed my right front wheel is angled in at the top. The drivers side looks fine. I know this is a caster, or camber adjustment,.... but I do not know what to adjust... is this a cam plate adjustment? just curious. I need to get the front end close enough to drive it to an alignment shop. ALL front end components are new, with the exception of the cam eccentric washers. Thanks,

Triggerjay

 

[340mopar]

It is a camber issue, you will adjust the cams equal amount to set the camber without disturbing the caster to much.

 

[black betty]

You can drive it to the alignment shop with the camber the way it is. You need to get the toe set so the tires dont drag down the road. You can get it close with a tape measure.