Custom Interior

-
M

moparduster

Well-Known Member
Joined
May 21, 2008
Messages
158
Reaction score
3
Location
Summerville,SC
I was getting tired of hearing people ask me where all my panels were and I dont have the money to buy new ones, so i decided to make my own. With the help from some of yall i took some of your ideas and decided to try and tackle them for myself. I started with a piece of 1/8" hard board and made the templets and cut everything out. Then went to the fabric store and got some vinyl that they had on clearence. Here is how everything turned out.
 
l_eed2451e7bad43d099d8b966c2ceb0c7.jpg


l_6437d713b19845058b0950b547253172.jpg


l_85dd52d4f38e4a4fb507418a89aff4e8.jpg


l_ebf392fc8f8542a2bff972da08d85e41.jpg


l_dec2bd7d7b5c43ffbbd74242dd603d89.jpg


l_cababac742c546f6a57265bd5feb66c7.jpg
 
Nice work. I like it. Turned out looking good. Now you need some black dye to match up the seats and arm rests.
 
Ive got a white back seat in the shed, just have to clean it and my buddy gave me some vinyl spray paint the im going to try. hopefully it will all turn out pretty good once i put all that in. Tomorrow im going to try and build a center console. We'll see how that turns out.
 
You must log in or register to reply here.
-

Back
Top