[SOLD] cutting up 73 dart sport-- really!!!! sawzall!! check it out--

[VDART]

cutting up the 73 dart sport-- trying to save inner fenders/frame rails 7 t bar mount -- if any of you see pieces needed-- pm me--- thanks Lawrence car is in wichita ks 67209--- origianl thread here:
http://www.forabodiesonly.com/mopar/showthread.php?t=206690

 

[cudacrazy67]

I need the plates that go around the ac and heater core outlets. They Are little metal plates that are on the firewall. I see the one for the ac. Do you have the other one? How much shipPed to 17813? My paypals ready. Mike.

 

[VDART]

are you talking the small heater hose clamp & the black ring that goes around the blower wheel? i have the heater hose piece for sure I think the black clamp is laying in the garage.

 

[cudacrazy67]

Pm sent

 

[VDART]

rickshaw anyone?

 

[VDART]

photos

 

[cudacrazy67]

The brackets pictured above. Are these the same as as a 73? These are the plates that go on the firewall to help support the heater core and ac lines. Does anyone have a 73 duster with air to match these up to? I want to buy them but i also want it to be correct. Mine were missing from my car. Thanks for any help. Mike.

 

[TrailBeast]

I have a 73 and the plate with the two holes for the heater hoses is flat, not flared over on the edges.

 

[VDART]

check out the engine bay pic-- it has a/c & non-flat bracket
http://www.forabodiesonly.com/mopar/showthread.php?t=208995


check out Satens engine picture-- you have your info there,

 

[72ValiantSlant6]

Do you still have the wheel hub assembly? The piece that houses the bearings and the studs go through to hold the wheel on? If so please tell me how much you would sell for. Im restoring my daughters car and thats the last piece before it can be driven.

 

[VDART]

for disc brakes? I have the complete brake assemblies -- not going to piece them out like that. thanks Lawrence

 

[Bulldozer]

that looks like fun LOL

 

[VDART]

come on down!!

 

[VDART]

front section is now in 1/2 one of the frame rails was cracked at the "k" member bolt area-- very surprised to see that-- going to save the inner fenders & parts of the frame rails front-
-- will be splitting the rear up for transport to the scrap yard this week
Lawrence

 

[trudysduster]

PM me if the tail ight panel is in good shape. I mean it has to be near perfect and if so how much.

 

[hoop]

:sad7::angel10:

 

[Johnny Dart]

Seeing this thread I just can't stop thinking of this guy.
Anybody know his story ?
Hint.....Hacksaw.

 

[forced 340]

how much for both front inner fenders shipped to 48239?