Looking for the spring perch measurement center to center on 1981 truck,had no luck on the Truck forum search.so thought Id try here. Thanks FABO
D-150 measurement ?
- Thread starter sabre67
- Start date
-
Call Babcock spring in Milwaukee, Wisconsin. (414) 276-4450. They also will make them for you, real good folks to work with.
looking for Center to Center spring perch measurement in inches. Cant find that. thanks
Tomorow OK for an actual measurement?
ok thanks Max 1196
Last week, your truck didn't have a rear axle. You got something on the the go now?
Yes found a 8 3/4 for it
43 1/2 sticks out in my mind, but I'm not 100% sure.
I'm wanting to say 44 inches, or the same as late 60s B body width but with the perches mounted on top instead of underneath.
Maybe once you work out the info, that tid-bit can be added to the sticky??
An accurate 8 3/4" rear axle width list
An accurate 8 3/4" rear axle width list
I have an 82 D150 with an 8.25 in it. If you want a measurement on that let me know. I can get it after work today
More for you, this one is measured at the actual spring pad location. 43 and 1/2 c/c.
You are not centered on the start end of your tape. Center to center would be 43 1/4" by your measurements, being not being hooked over the center bolt but being on center of the bolts.
Thanks Max 1196,thats exactly what I needed. Ahh snow in Sask,keep it there dont want it out west lol. Thanks for the measurements,now get inside and warm-up
George. I can't hold the tape and photo at the same time. The measurements ARE what I said they ARE.
-
