kingvern
Well-Known Member
Contact seller
I bought this Dana 60 this past weekend. I thought I would be able to use it for my a body but it is a little to narrow for me. It is a car dana as you can see it has the bolt holes for the pinion snubber. It has a spool with Richmond 4:56 gear. Pretty sure they cut the stock axles and had them resplined. Has 11” x 2 1/2 brakes.
The gears look really new, I think the axles are original cut and resplined. Plate to plate 43 1/2" and drum to drum is 52"
Spring perch center to center is 36”
Now the bad:
When they cut the tubes they cut them in the center. It looks like a good job just not how I would have done it.
And in one of the pics you can see one of the ears for the stud is broken.
Please no derogatory remarks if you’re not interested please move on.
1250.00 o.b.o + shipping and pay pal fee’s. I will put it on a pallet and drop off at a fastenal you pay shipping when you pick it up.
The gears look really new, I think the axles are original cut and resplined. Plate to plate 43 1/2" and drum to drum is 52"
Spring perch center to center is 36”
Now the bad:
When they cut the tubes they cut them in the center. It looks like a good job just not how I would have done it.
And in one of the pics you can see one of the ears for the stud is broken.
Please no derogatory remarks if you’re not interested please move on.
1250.00 o.b.o + shipping and pay pal fee’s. I will put it on a pallet and drop off at a fastenal you pay shipping when you pick it up.