[Found!] Dart / Demon Pot Metal Fender Extensions

-
Status
Not open for further replies.
azmopar said:
FRONT I PRESUME? and what year 70-71 are the same 72 is different
Click to expand...


I know very little about these.

My car has one deep on it and one shallow. My car is a 72 with a 70 grille in it.

Looking to get a pair with the shallow trim required.
Also need the trim.
 
I've got a set of the trim. Not really pretty, but its there. Could get it rechromed or just stick it on if its a driver. Have the trim that goes on the hood as well
 
maxie said:
I know very little about these.

My car has one deep on it and one shallow. My car is a 72 with a 70 grille in it.

Looking to get a pair with the shallow trim required.
Also need the trim.
Click to expand...
that's the 72 I believe
 
azmopar said:
that's the 72 I believe
Click to expand...

Yes 72 only. I have one NOS 72 pot metal fender extension and one NOS trim piece for the 72 Dart Demon. I forget which sides they are $135 extension and $120 for the trim piece. If interested PM me and I can dig them out over the weekend.
 
have one left side,check your p.m.

P1050096.JPG


P1050097.JPG


P1050099.JPG
 
Here are NOS pieces I have both for the RH side. NOS fender extension is nice just dirty and tape residue stuck on it. The extension trim piece is perfect and dated April 1973. Just let me know then.

<These parts are SOLD to MAXIE> Thanks FABO

IMG_7460 (Custom).JPG


IMG_7466 (Custom).JPG


IMG_7458 (Custom).JPG


IMG_7461 (Custom).JPG


IMG_7456 (Custom).JPG
 
Last edited:
Status
Not open for further replies.
-

Back
Top