Muscley MOPAR
Well-Known Member
if im not mistaken a bodies have their calipers in front and f bodies or volare have them in back right? now do you just switch the volares spindle right to left to get them in front?
dart vs volare
- Thread starter Muscley MOPAR
- Start date
-
breakstuff
Well-Known Member
F,M,&J bodies use the same spindle. They are about 3/8" taller than an A.
Yes, the Volare (FMJ) spindles just need to be swapped side to side to put the calipers up front.
Don't forget to swap the calipers too, otherwise you'll end up with the bleeders in the wrong spot.
Don't forget to swap the calipers too, otherwise you'll end up with the bleeders in the wrong spot.
Muscley MOPAR
Well-Known Member
hey thanks good thing u said somethin about the calipers that would have pissed me off Wen I started bleeding...we had a 95 taurus that a guy bought his own calipers for the left side nd we couldn't get the dam thing bled turns out he had one for the right nd the bleeder was about a 1/2 inch pass the caliper center line took us a little while but we finally figured it out he
-
