wireweld
Well-Known Member
How do you remove the dash pad on a 72 dart?
Do you have to remove the dash to do it?
Do you have to remove the dash to do it?
dash pad
- Thread starter wireweld
- Start date
-
The instrument panel and glove box will need to come out. There are 5 studs welded on the caps underside. Those nuts are 3/8 or 7/16 ( i forget ). Then about half way down each side of the turned down portions there is a sheet metal screw requiring 1/4 or 5/16.
I suggest starting at the right side. A search here should find threads containing pics. Good luck. Dont forget to remove the neg' battery cabel before pulling the inst' panel.
I suggest starting at the right side. A search here should find threads containing pics. Good luck. Dont forget to remove the neg' battery cabel before pulling the inst' panel.
-
