B bluepressman Well-Known Member Joined Apr 12, 2010 Messages 72 Reaction score 7 Location Alabama Mar 14, 2014 #1 Has anyone used a ring and pinion made by Extreme, USA, G2 or DTPLV. I have an 8.25 suregrip, looking to put 355 gears in it, any help would be much appreciated.
Has anyone used a ring and pinion made by Extreme, USA, G2 or DTPLV. I have an 8.25 suregrip, looking to put 355 gears in it, any help would be much appreciated.
fishy68 Tyr Fryr's Inc. Joined Jan 11, 2005 Messages 16,584 Reaction score 1,264 Location Central, IL (Hooterville) Mar 15, 2014 #2 Not sure if USA is the same as US Gear but I used a US Gear set on my Pop's Rambler (Ford 8.8" rear) and they were quality gears
Not sure if USA is the same as US Gear but I used a US Gear set on my Pop's Rambler (Ford 8.8" rear) and they were quality gears
Supershafts Well-Known Member Joined May 12, 2010 Messages 1,413 Reaction score 68 Location Long Island, N.Y. Mar 16, 2014 #3 US gear and usa standard are different. US gear is good, usa not so much.. The others (extreme, dtplv, yukon) are boxes in which you may find not so wanted gears in them US gear and others will be better. G2 i have used a few times and they didn't seem bad, were quiet, but i seen no signs of them running them in. .
US gear and usa standard are different. US gear is good, usa not so much.. The others (extreme, dtplv, yukon) are boxes in which you may find not so wanted gears in them US gear and others will be better. G2 i have used a few times and they didn't seem bad, were quiet, but i seen no signs of them running them in. .