I'm sure this has already been asked, but I have a 67 Dart that has already been converted from drum to 5 x 4" discs. I am wondering if I can change the lug pattern from 5 x 4" to 5 x 4.5" to match the 8 3/4 rear end by simply buying a different rotor and bearing set off of a 72/73 A body?
Disc Brake Conversion - 5 x 4 to 5 x 4.5
- Thread starter JKicker
- Start date
-
67GTConvert
Well-Known Member
Later mopar ones won't work due to the different spindles but there is another way:
http://www.forabodiesonly.com/mopar/showthread.php?t=20544&highlight=mustang+rotors
http://www.forabodiesonly.com/mopar/showthread.php?t=20544&highlight=mustang+rotors
MileHighDart
Well-Known Member
I"m going to try the Mustang rotor thing. Just ordered 2 disks from Rockauto. I'll let ya know how it turns out in the other thread.
http://www.forabodiesonly.com/mopar/showthread.php?t=20544&highlight=mustang+rotors
http://www.forabodiesonly.com/mopar/showthread.php?t=20544&highlight=mustang+rotors
67GTConvert
Well-Known Member
That would be cool,always good to get more feedback on that swap.
I was going to do that on my car this winter but I just got a great deal on a set of SBP rallyes so I'll run those this year and if I get bored of them I'll do the front rotor and rear axle swap and run something different.
-
