74fldart
Well-Known Member
fellas i need your help, can anyone tell by looking at my photos if the k frame is for a 6 or and 8. i want to get big block mounts but need to know what i have in there. thanks
do i have a v8 or /6 k frame?
- Thread starter 74fldart
- Start date
-
thanson_mopar
Well-Known Member
it looks like a v8 k frame but the picture is too high, on a slant six k frame the drivers side engine mount perch is substantially taller than the passenger side mounting perch. If the two perches are about the same size , then it is a v8 k frame
Here is a good reference on k frame ID's http://www.engine-swaps.com/frames/frame_K-Member-ID3.html
74fldart
Well-Known Member
ok its confirmed , i have a v8 k frame. thanks guys for the info.
Small Block
Well-Known Member
If the car that it's in has a fender tag look at it. The bottom first # on the left is what? An E44 is a 318, E55 is a 340. Anything lower is a slant. What year car?
74fldart
Well-Known Member
the guy i got the car from said it was a slant 6 originally , he has a 340 he was going to put in but got hurt a few years back and couldnt finish it. he said that the car has now got a v8 k member but i wanted to make sure before i buy the expensive mounts. it is a 74, ill look at the tag. thanks
-
