Drag link/steering link 72 Duster

[oldirish]

I converted my 72 duster to power steering which needed to different loan arm. Now the steering link doesn't work. I've seen a lot of posts on this subject

I can't find the part number for the 73-76 steering drag bar. I also don't know if I'll need to change the tie rods.

Any advice or help would be appreciated.

 

[Jeremiah (jd)]

The tie rods and sleeves are interchangeable. To my knowledge no 73-76 center link is reproduced. Ithink I was able to use the 73-76 power steering idler arm on my 68 gts manual steering box. You will need to verify the pitman arm interchangeability.

 

[Jim Lusk]

The early power steering used the same pitman arm as the manual box. You went with a large sector box which will require the '73-up link, which is only available used. You will also need a '73-76 idler arm. Tie rods and ends will work.