[SOLD] Driveshaft with slip yoke

-
Status
Not open for further replies.
CL3406

CL3406

Well-Known Member
Joined
Sep 24, 2015
Messages
412
Reaction score
78
Location
BC
Rating - 100%
2   0   0
Contact seller
I have a small U joint driveshaft with a slip yoke for sale. New U joints installed, blasted & painted. Rear joint is an offset from 7260 to 7290 but can easily be changed out for just a 7260. $125usd plus the ride. Specs are as follows;

Length from center U joint to center U joint is 51.5 "

Slip yoke is 8 " long, 29/30 spline for 727 or 833 trans.

Shaft.JPG


Shaft 2.JPG


Shaft 3.JPG
 
Last edited:
CL3406 said:
I have a small U joint driveshaft with a slip yoke for sale. New U joints installed, blasted & painted. Rear joint is an offset from 7260 to 7290 but can easily be changed out for just a 7260. I will also take a trade for the same set up but for 7290 U joints. $145usd plus the ride. Specs are as follows;

Length from center U joint to center U joint is 51.5 "

Slip yoke is 8 " long, 29/30 spline for 727 or 833 trans.

View attachment 1715124912

View attachment 1715124913

View attachment 1715124914
Click to expand...
Not sold, reasonable offers?? Thanks.
 
CL3406 said:
I have a small U joint driveshaft with a slip yoke for sale. New U joints installed, blasted & painted. Rear joint is an offset from 7260 to 7290 but can easily be changed out for just a 7260. I will also take a trade for the same set up but for 7290 U joints. $145usd plus the ride. Specs are as follows;

Length from center U joint to center U joint is 51.5 "

Slip yoke is 8 " long, 29/30 spline for 727 or 833 trans.

View attachment 1715124912

View attachment 1715124913

View attachment 1715124914
Click to expand...
How much to ship to 79854?
Thanks
 
I will get a cost tomorrow for shipping...

Thanks for your interest.
 
Driveshaft is not sold, reasonable offers?? Thanks
 
CL3406 said:
I have a small U joint driveshaft with a slip yoke for sale. New U joints installed, blasted & painted. Rear joint is an offset from 7260 to 7290 but can easily be changed out for just a 7260. $125usd plus the ride. Specs are as follows;

Length from center U joint to center U joint is 51.5 "

Slip yoke is 8 " long, 29/30 spline for 727 or 833 trans.

View attachment 1715124912

View attachment 1715124913

View attachment 1715124914
Click to expand...
Can you tell me possibly what the driveshaft came out of. And what shipping would be to 77627, thank you.
 
Sure I will quote tomorrow afternoon when I get back home. I don't have the dimensions & weight with me, look for a PM later on tomorrow.

Thanks
 
Shipping to 95822 will be $54 usd. Your inbox is full btw. Send me a PM. Thanks
 
Status
Not open for further replies.
-

Back
Top