driveshaft

[muller]

can someone tell me what the length should be for a smallblock with a 727 and 8.25 rear end?

thanks,
barry

 

[speedyb-cc]

Do a search there was a chart posted last week listing most all a-bodies.

 

[NiceFishEh]

can someone tell me what the length should be for a smallblock with a 727 and 8.25 rear end?

thanks,
barry

If you are using the same transmission yoke, undo the shaft at the rear end, shove it into the trans as far as it will go. Then measure from the centre of the trans yoke and the centre of pinion yoke and deduct at least 1" but not more than 1 1/4".