[WANTED] Early 70s 360 block

-
Status
Not open for further replies.
I have a very early nice #341 Block No Sleeves
or issues ever! Plus it Sonic tested well.
It is bored .020 and it cleaned up
perfect.
I work in San Bernadino once a week and could
meet you there.

$495.00
 
I have a very early nice #341 Block No Sleeves
or issues ever! Plus it Sonic tested well.
It is bored .020 and it cleaned up
perfect.
I work in San Bernadino once a week and could
meet you there.

$495.00

Hi, GTX John. Thank you for responding. I need a bit more info if you wouldn't mind.
Could I get the complete casting #?
Can you send some pics?
Has it ever been decked?
Thanks, James
 
Hi, GTX John. Thank you for responding. I need a bit more info if you wouldn't mind.
Could I get the complete casting #?
Can you send some pics?
Has it ever been decked?
Thanks, James
3418915 is the casting number and this is the
ONLY number we have found to have the consistently thickest cylinder walls
in our testing.
It has not been decked ever.

After 60 plus years of Drag Racing on a National Level = I am aging out.
Otherwise I would not be selling this block that I have had forever.
I will post pictures in an Ad Tuesday if not sold by then.
 
This number is the same as 70 to 72 340 Block #
BUT this is a 360 Block = they were the same casting # but bored
4.00 INSTEAD of 4.04 from the factory and mains are 360 size. (Rare to find anymore in this shape!)
 
This number is the same as 70 to 72 340 Block #
BUT this is a 360 Block = they were the same casting # but bored
4.00 INSTEAD of 4.04 from the factory and mains are 360 size. (Rare to find anymore in this shape!)
 
This number is the same as 70 to 72 340 Block #
BUT this is a 360 Block = they were the same casting # but bored
4.00 INSTEAD of 4.04 from the factory and mains are 360 size. (Rare to find anymore in this shape!)

I am definitely interested. I have more questions. Could we email each other and exchange phone #'so? My email is [email protected]

James
 
What GTX John is telling you is gospel. I acquired one of the 341 360 virgin blocks to build a copy of a Hensley 416 stroker. I had my block sonic tested per John's suggestion & was able to go 4.060 with no problems. Good luck with your build.
 
What GTX John is telling you is gospel. I acquired one of the 341 360 virgin blocks to build a copy of a Hensley 416 stroker. I had my block sonic tested per John's suggestion & was able to go 4.060 with no problems. Good luck with your build.
Thanks for the info Demonracer! I appreciate it.
James
 
Status
Not open for further replies.
-
Back
Top