[Found!] Early A body Steering Rod (Center of Column)

-
Status
Not open for further replies.

MonkeyMadness

FABO Gold Member
FABO Gold Member
Joined
Jun 13, 2016
Messages
1,503
Reaction score
2,071
Location
Yorba Linda California
Rating - 100%
18   0   0
Contact seller
Hello,
Looking for the Steering Rod from the steering column. Mine has damaged threads and needs to be replaced. I'm in the process of modifying my column for EPAS and can use any Early A body steering rod.
If you have one please hit me up with price shipped to 92886 Please and thank you!


This is what I need to replace.
15537396537745295416461148287174.jpg
 
OK let me dig it out, get you some pics, get it packed , get some shipping prices and figure out a cheap price for it
 

I wouldn't hesitate to take that down one size, 1/2 to 7/16, 7/16 to 3/8, even some metric thread that lands in the right dimensions. Wheel turning force is on the splines anyway.
 
I wouldn't hesitate to take that down one size, 1/2 to 7/16, 7/16 to 3/8, even some metric thread that lands in the right dimensions. Wheel turning force is on the splines anyway.

To MM - if you want to try that first, give it a try. I’ll still get you some pics.
 
I have a few of them somewhere .Keep in mind power steering ones are shorter than manual steering ones so be specific in which version you are looking for
 
I have a few of them somewhere .Keep in mind power steering ones are shorter than manual steering ones so be specific in which version you are looking for
Doesn't matter Which one I get, I only need the first 14" of the rod. I'll be cutting it down to adapt the EPAS unit to it. I wasn't specific on purpose, I was kinda afraid it would be much harder to find them, So I am willing to take any one i could get my fat little hand on, but thank you..
:thumbsup:
 
Doesn't matter Which one I get, I only need the first 14" of the rod. I'll be cutting it down to adapt the EPAS unit to it. I wasn't specific on purpose, I was kinda afraid it would be much harder to find them, So I am willing to take any one i could get my fat little hand on, but thank you..
:thumbsup:
Your welcome
 
Status
Not open for further replies.
-
Back
Top Bottom