Early A Body W2 Headers Needed

[georgemaxlear]

Hello,
We are upgrading our 1966 Valiant Signet drag car. The W2 headed 408", high compression, roller cam motor is nearly ready for the Dyno. We can't find any headers that are big enough and hope someone can help us help locate a set.

I am interested in a set of 1 7/8 or 2’ headers for W2 heads on an early A body Mopar (1964-1966). Does anyone have such a set of headers OR can you recommend where I might obtain them?

Hedman used to make Part # HED-75115 and 75120 for this application, but none are available now. I believe Doug Thorley headers used to make them as well. If a used set of 1 3/4 to 2' headers were available that I could repair or upgrade, I would be interested.

We appreciate the help.

George Lear 302-988-1485 georgemaxlear@yahoo.com

 

[dansuperbee]

I have a set of early a body 2 inch prime, 3 1/2 out. They have never been used. I sent you an email. Did not know you where on this forum. This is my craiglist ad. http://vancouver.en.craigslist.ca/search/?areaID=16&subAreaID=&query=husler&catAbb=sss