Early brake master cylinder adapter

[dustymopar]

Hi, I have a 66 Val. I am current running new brake lines throughout.

There is an male to female inverse flare adapter on the end of the brake master cylinder that could do with replacing. Could anyone tell me what size it is?

TIA

 

[amx364]

non-stock fitting for replacement master cylinder. you will need to measure for replacement. McMaster-Carr best bet on fitting. IMHO

 

[BillGrissom]

My 65 Dart MC had a single tube coming out that was a 1/4" inverted flare. I wouldn't waste time on the single MC.

Much safer to swap to a dual MC. If so, get a 3/16 F to 1/4 M inverted flare adapter to put in your distribution block (top port) and a 3/16" plug (rear port). You can find in the bubble packs at Autozone.

I am putting an MC from a Breeze in my 64 Valiant and keeping it manual. I just drilled 2 holes in the firewall/brake bracket for it, but there are adapter plates. I used a Breeze power setup in my 65 Dart.