Edelbrock 650 avs Overlooked Bog Issue solved

[Slantsix64]

So i been chasing this bog issue at WOT did different things like upgraded the squirter , moved the pump shot to the highest position step up springs/rod changes, while these things helped it did not make my bog disappear. What did was the information on another website which said to bend the accelerator pump linkage to place the pump in the correct spot when adjusting the pump shot. Now the bog is gone 100 percent. Hope this helps others

 

[rumblefish360]

I’m glad to hear of this.
I hate to state those directions are in the instructions.
The pump shot plungers height has a setting. After any adjustment, the linkage rod has to be bents

 

[Slantsix64]

I’m glad to hear of this.
I hate to state those directions are in the instructions.
The pump shot plungers height has a setting. After any adjustment, the linkage rod has to be bents

oh dang i didnt know that they were, every time i looked up this issue through google all that was said was to move the pump shot up or down.

 

[rumblefish360]

LMAO! That’s ok!

Im sorry I didn’t tune into the thread earlier.