[WANTED] Edelbrock D66 Dual quad intake manifold

-
Status
Not open for further replies.
jeff alder

jeff alder

Well-Known Member
Joined
Nov 10, 2019
Messages
2,754
Reaction score
3,579
Location
crescent city illinois
Rating - 100%
16   0   0
Contact seller
looking for a nice one or I can refurbish one for a 1966 formula s Barracuda 4 speed 273 build I am planning. I know these are hard to come by and I just missed a pretty nice turquois one posted by another member as it was already sold. I will put it to good use. Thanks guys!
 
Last edited:
I pulled mine out and took pictures of it but it’s an Offenhauser. Sorry about that.
 

Here’s Photos

IMG_8215.jpeg


IMG_8216.jpeg


IMG_8217.jpeg


IMG_8218.jpeg


IMG_8219.jpeg


IMG_8220.jpeg
 
what the heck Dave you went thru all that trouble what do u want for it? I am not too familiar with this one's port sizes for a match to a 273. Maybe you could give me the "skinny" on that. I do have an old 65 Commando 4 gear car that someone installed a 360 in sometime in it's life. Iv'e been wanting to build and bottle feed this car for my smart alec big block chevy neighbors to be beaten by. LOL We have an old drag strip near us at US 41 in Indiana. These cars are strong but they don't seem to get the engine, trans, rear end gear, tires and weight etc all matter...Not just the amount of horsepower a big block makes. One of the neighbors is actually a lifelong friend of mine and we went for a ride in his SS 65 Malibu. It's a 4 gear, posi and the engine was built by a local dirt track racer. It's strong but spends more time going sideways then forward. LOL. I'm pretty sure I could get him with a beefy little 273. Let me know what you want for the Offy please but only if you don't have any use for it. Have a great Day and again thank you.
 
Last edited:
Status
Not open for further replies.
-
Back
Top Bottom