Andrew vanman87
Well-Known Member
Contact seller
This is a valve and valve springs retainers and shims came off of my 340 heads Edelbrock head part number 60779 (heads)2.02 valve I removed these off of my Edelbrock head because I went with larger size valves when I did a full CNC port on them no longer need this set ... I believe the springs are good for a .575 lift ... ( There What came stock on an Edelbrock 60779 head ) Only thing missing in this set are the keepers ... I didn't run long on my car before I took the heads off for porting. 150$ for everything location is San Diego California
Last edited: