[SOLD] Edelbrock LD4B for 273/318/mild 360 - like NOS condition $300 plus shpg.

-
Status
Not open for further replies.
G

Gary Pavlovich

Well-Known Member
Joined
Apr 26, 2010
Messages
47
Reaction score
0
Rating - 100%
1   0   0
Contact seller
Edelbrock LD4B in like NOS condition for sale. Originally made to vastly improve HP & Torque in over the factory single plane manifold in a 1966/67 273 Commando from off-idle to 6000rpm. This is smaller cube engine counterpart to the LD340 intake for 340 and Hot 360 engines. This intake is in like NOS condition with zero corrosion as you can see by the pictures. This manifold will also fit the "early" 1964/65 273 Commando engines with a simple enlarging and angling of the bolt holes. Please PM me with any questions and I can send you my email or phone number if you like. $300 BIN or let me know your thoughts/offer and comes with the original cast water neck outlet. I will be "thinning the herd" on so many more of my Mopar parts...and will try to post more later.
Thank you,
Gary in Santee, CA 92071 (San Diego County)

5-17-17 LD4B plenum view.jpg


5-17-17 LD4B perfect ports.jpg


5-17-17 LD4B side view.jpg


5-17-17 LD4B underneath view.jpg
 
Last edited:
Jake, Did I answer your questions about the D4B? I received an email but no new thread/question.
thank you,
Gary
 
Jake, Let me know if I can answer any further questions you may have. This intake will perform flawlessly on a 273 or 318 with improved torque & driveability over the stock manifold.
Gary
 
Status
Not open for further replies.
-

Back
Top