[SOLD] Edelbrock LD4B Intake Manifold 2836139 $125.00

[Cliff Ramsdell]

Sold sold sold.

Price Drop..

Hi all,
I have a used LD4B intake, Chrysler part number 2836139 cast into it.

This intake is a well worn and used and has been stored in its last as used condition.

I’m not cleaning it so you can see how it was off a running car. It has a crack up the back of the intake, 1 1/4” long or so that was sealed up with some silicone years ago and functioned like that.

It looks like the pin in the block China wall was too high and the intake was tightened down and caused the crack.

$125.00 plus shipping, it’s about 20 lbs packed up. PayPal payment preferred sent friends and family.

Thanks,
Cliff Ramsdell

 

[Cliff Ramsdell]

Bump it up with a price drop. It time for a re-home my friends.

 

[JDMopar]

It says LD4B on the front end and D4B on the back end? Can you take another pic where it says D4B to see if the L was ground off at some point in its life?

 

[Cliff Ramsdell]

It says LD4B on the front end and D4B on the back end? Can you take another pic where it says D4B to see if the L was ground off at some point in its life?

I saw that and it looks to be a casting error with the letter “L” being omitted. The bolt pattern and angle is 1966 and later as an LD4B would be as opposed to the early 64/65 D4B intake.

Still needs a home. Cheap money, fix it and save.

Cliff Ramsdell

 

[JDMopar]

PM sent.