For sale are a nice used set of Edelbrock RPM heads part # 60779 featuring 63 cc chambers and hand porting and polishing. Valves, valve springs retainers and locks were replaced with aftermarket parts. I have not had the heads flowed. Valves are stainless steel Manley valves with narrowed stems in the bowl area and are swirl polished. They are 2.02 intake and 1.60 exhaust with 11/32 stems. One valve job to date. Lots of margin left. Valley Head Service in CA reconditioned the heads last year by cleaning, pressure checking, replacing 8 exhaust bronze guides, performance valve job, a light resurface and new valve seals. The new valve springs are Lunati dual springs with damper part # 73100-16 which are 333 pounds/inch with matching Lunati steel retainers part # 75743-16 and keepers. The springs are good for a solid lifter cam or hydraulic roller. One thing I will point out is one chamber has very light pitting around one valve from the use of a small 75HP shot of nitrous used before I reconditioned the heads. You can see it in one of the pictures if you look closely. These are fresh from the shop and ready to run.
Price is $1,750 plus actual shipping. Shipping in lower 48 states will be between $50 and $100 for the pair depending on the ship to location. Pickup in CT welcome.
I am traveling to Montreal the first week of July and can bring them with me if paid in advance.
I can also ship internationally for the additional cost.
I also have a new RPM Air Gap I can sell with these heads.
PM me with questions.
View attachment 1715350398
Price is $1,750 plus actual shipping. Shipping in lower 48 states will be between $50 and $100 for the pair depending on the ship to location. Pickup in CT welcome.
I am traveling to Montreal the first week of July and can bring them with me if paid in advance.
I can also ship internationally for the additional cost.
I also have a new RPM Air Gap I can sell with these heads.
PM me with questions.
Last edited:
