[Found!] EGR Block off plate slant six

-
Status
Not open for further replies.
They removed the EGR from the Chrysler minivan 3.3L/3.8L engine somewhere in late 98 to 2000 and used an EGR block off plate that is the same geometry as the old EGR's... Go to a dealer and look it up in the parts book and order one...
 
Get a EGR gasket and trace it out, cut it out of a steel plate, drill out the 2 mount holes, sandwich gasket between fresh cut plate and manifold,bolt it on and there ya go
 
This is a picture from the internet somebody Incorporated some heat shield over the intake manifold but it is a slant six one barrel with egr same thing as a 2 Barrel, that hole right under the carb needs to be tapped and plugged.

20220717_182415.jpg
 
Last edited:
Hello, sorry for the delayed response, we were on vacation.
Yes, I still have and sell the EGR block off plates, along with the exhaust block off plate. They are $11.00, plus shipping. Just let me know if your interested. Thanks Marcus
 
Yup and the exhaust block off would be for the bottom of the intake for when you run headers
 
Ok so it looks like I found what I originally set out for thanks to @Marcus V.

I look foward to seeing the mail show up with a bolt on part for a mopar :D

Thanks so much fabo
 
Status
Not open for further replies.
-

Back
Top