[Found!] emergency brake strut levers and actuators for 10" drum

[T-Man700]

Well I guess the previous owner of this 72 Demon didn't need a working parking brake. Bought the cables and nothing to attach to inside the rear drum. Need both sides, thanks.

 

[Pnypwr]

Save your aggravation they repro them from megaparts or Mancini I think it’s like 60 bucks for them all

 

[T-Man700]

Save your aggravation they repro them from megaparts or Mancini I think it’s like 60 bucks for them all

What's the difference between pre-73 and 73 and up brake strut levers? My car is a 72 but not sure if the whole diff. is correct for that year? Was the difference in the shoes or backing plates in regards to the change in 73? Yeah, I'll probably buy repops.

 

[Avispa]

Probably the SBP and the BBP backing plate offset.

 

[T-Man700]

Probably the SBP and the BBP backing plate offset.

Well it's a BBP 8 3/4 diff so I should get the 73-76 levers?

 

[Jimacuda]

If current brakes are 10" x 1-3/4" you'll need the ones specifically for that size.
If they are 10" x 2-1/2" you can use either type.
I believe its a drum clearance issue on the spreader bar for the smaller brakes.

 

[T-Man700]

If current brakes are 10" x 1-3/4" you'll need the ones specifically for that size.
If they are 10" x 2-1/2" you can use either type.
I believe its a drum clearance issue on the spreader bar for the smaller brakes.

Thank you, there're 10"x 1-3/4" so I do need the earlier 65-72 brake levers.