F Heads??

-
74swingerlover

74swingerlover

Well-Known Member
Joined
Feb 19, 2009
Messages
201
Reaction score
1
just pulled apart a 82' 360. heads say "F" and have a part # 6027593. I already have a set of "X" heads ready to go. but my question is should I save these "F" heads or use them as boat anchors?
 
I've seen a lot of F-heads, but they were all the human version.

;)
 
Big chamber on that head. Be alright if you milll it down to get comp back up. Otherwise your looking at 8:1.

Another cheapo compression boost is offset grinding the crankshaft. This raises the stock piston as well as adding a few more cubes.It"s a shadetree method but it works,lol..
 
I wonder what they get to off set grind a crank these days. Used to be big money.

The 360 head on top will just slow you down unless the 318 is ratherly pumped up a good bit. You have to get that teen spinning real good in order to use that port size. Better off porting the 318 head in most cases.
 
I dunno but my machinist charges the same as a regular crank. Set up time is no different.
 
Sounds like I should just put them on kijiji for someone who could use them. How much should they sell for?
 
You must log in or register to reply here.
-

Back
Top