Fan pulley - with more information

[fourspeed]

The search continues for a single-groove A engine fan pulley. This is for a '69 340 with an Edelbrock water pump.

I have a double-groove pulley that will not line up with my alternator. I did some measuring, and the pulley I need, when sat on a bench, will measure 3" tall, give or take. My double-groove pulley is more like 2-1/4".

If you have one, please let me know your price and shipping. A photo would also be nice, but not critical.

Thank you,
Mark

 

[dusterdood]

I measued a couple that I have at 2 3/4" or 2 7/8". Just under 3". One is smaller than the other in diameter, so it wouldspin your pump faster. If you wanted to try these, $5 plus shipping.
Mike

 

[fourspeed]

2-7/8" is probably right. I was kind of eyeballing the measurement with a machinist's scale. I'll PM you with my info when I get home. All else being equal, the larger diameter pulley would be nice.

Mark