Fast xfi

-
Yes, you will need that "connector kit" also.

Edit. Or not necessary, those EFI XIM are coming with loom according the add. And cheaper than that carb kit.
You need to send mail to the company.
 
Jousi said:
Yes, you will need that "connector kit" also.

Edit. Or not necessary, those EFI XIM are coming with loom according the add. And cheaper than that carb kit.
You need to send mail to the company.
Click to expand...

I stuffed up the link - I've corrected it and re-worded my question.

If the XIM will work as the Crank,cam and MAP controller - will it plug straight into the factory harness?
 
XIM and XFI have both own wiring looms and ecu connectors are different than Mopar, so to you question it will not work with Hemi factory loom. You rip everything old out and put FAST wiring loom to those sensors. It also have all fuses and relays built in the loom, so all you need is couple wires to battery and ignition switch.

I meant earlier that this wiring loom is maybe included in that stand alone kit.
 
You must log in or register to reply here.
-

Back
Top