[FOR SALE] Few A body parts cars I picked up today

[Mike440]

I picked up a few parts cars today. Let me know what you need the list and pictures will be below. All parts and cars located in 23970 va
Respond here then PM me
Paypal or local pick up only
I can get more pictures of parts or cars If needed

1970 340 duster
1971 dart swinger slant six
1971 340 duster
1973 duster 340
1973 duster 340

 

[dale_brennon]

Any of them have a manual box? I could also use one of the V8 k-members.

 

[CudaJunction]

How much for the bellhousing and cover? If its v-8?

 

[Mike440]

Any of them have a manual box? I could also use one of the V8 k-members.

Yeah I've got one in the 70 and what year k frame PM me

 

[dale_brennon]

How is the rear bumper on the 70-71 duster? I am just going to paint it, so as long as it's straight im not worried about the chrome, I'd need the brackets as well.

 

[Mike440]

How much for the bellhousing and cover? If its v-8?

Keeping them sorry bud

 

[Mike440]

How is the rear bumper on the 70-71 duster? I am just going to paint it, so as long as it's straight im not worried about the chrome, I'd need the brackets as well.

Pretty strait PM me with a list you need I'll send you prices / prices

 

[jhnycuda]

Do you have a kickdown assembly for a SBM, 4-barrel with a 904 trans?

 

[Mike440]

Do you have a kickdown assembly for a SBM, 4-barrel with a 904 trans?

I may PM me

 

[73hcode]

Hey mike what about a kickdown linkage for a 340 /727 combo also a thermoquad for an auto 340 from 73. I think 6318 or 6319. Thanks. Waiting on the exhaust brackets I checked and the passenger side has the three bolts the driver side is spot welded. Thanks again. Ed

 

[brandon.marx]

Mike,
I am interested in the 71 swinger reverse light lenses...and if you happen to have a 4bbl throttle rod. I have the 2bbl rod....but need the 4bbl for an Edelbrock 1406

Thanks!

 

[Mike440]

Hey mike what about a kickdown linkage for a 340 /727 combo also a thermoquad for an auto 340 from 73. I think 6318 or 6319. Thanks. Waiting on the exhaust brackets I checked and the passenger side has the three bolts the driver side is spot welded. Thanks again. Ed

PM me

Mike,
I am interested in the 71 swinger reverse light lenses...and if you happen to have a 4bbl throttle rod. I have the 2bbl rod....but need the 4bbl for an Edelbrock 1406

Thanks!

PM me

 

[73hcode]

P M sent thanks

 

[davescuda]

I needs these brackets
the passenger side exhaust brackets ones one the inside goes through the floor and the other in underneath

I need 4 set

 

[plumkrazee70]

Pm sent. Windshield trim on the 71 dart

 

[73Duster]

PM sent.

 

[66340SEDAN]

That aluminum mag wheel leaned up against the car...what size is it and is it small bolt pattern? More than 1? Thanks

 

[Mike440]

P M sent thanks

PM replied
Thanks

I needs these brackets
the passenger side exhaust brackets ones one the inside goes through the floor and the other in underneath

I need 4 set

PM replied.
Thanks

Pm sent. Windshield trim on the 71 dart

PM replied
Thanks

PM sent.

PM replied
Thanks

That aluminum mag wheel leaned up against the car...what size is it and is it small bolt pattern? More than 1? Thanks

Not sure I will measure tomorrow and will double check for more then one.
Thanks

 

[72duster72]

This is what I am looking for.

 

[72duster72]

Does this help

 

[jhnycuda]

PM sent

I may PM me

 

[OmahaMopar]

I need both bottom rear window channel corners from a duster if they are rust free. You can the area I need in this pic if you look closely. thanks!

 

[Mike440]

I need both bottom rear window channel corners from a duster if they are rust free. You can the area I need in this pic if you look closely. thanks!

$100 shipped PM me
THanks

 

[plumkrazee70]

Pm Sent

 

[Mike440]

Pm Sent

PM replied
Thanks