First Start of a fresh 360.

[philchars]

Just got the 360 started for the first time!

[ame="http://www.youtube.com/watch?v=2-eGorQjTjs"]She Starts.MOV - YouTube[/ame]

Phil

 

[TXDart]

Sounds good.!!!
Is it a roller cam?
Details of you build Please !!!

 

[philchars]

Hey..

It is going into my 1970 VG VIP.

Its a 71 Block, Bored 30thou. rpm edelbrock with new roller gear 2.02 1.6 valves engine is 9.5 to1

max lift 525 525
@50 238 248
lobe sep 112 112

 

[Cal_gecko]

Sounds really good... obviously very loud due to the open headers, but you can tell it has a nice idle to it and sounds to be running well... Nice job!!

 

[dodgetkboy78]

Sounds like a happy baby 360! Congrats!

 

[smalblokmopar]

sounds great but somone put your master cylinder on the wrong side of the car.

 

[philchars]

sounds great but somone put your master cylinder on the wrong side of the car.

Haha, yeah I'm not sure if it would work if it was on the other side!

I'd love to take the motor out and modify the K-Frame to centre the motor!