Fit???

-

irelandmoss

Well-Known Member
Joined
Dec 1, 2006
Messages
249
Reaction score
0
Location
Shenandoah, Pa.
Would a console from a 69 Barracuda fit the mounting brackets that are on the floor from a 68 that is going in a 67?
 

They are all the same, however.................. there are earlier ones that look slightly different. I researched that for quite some time. I ended up getting a full set from ebay, and they were different looking than most. I could tell they were factory brackets, but they looked as if they were an early version. Worked just fine though.
 
-
Back
Top Bottom