FOUND Good 440 Block or Engine in VA

-
Status
Not open for further replies.
S

sls001

Member
Joined
Feb 2, 2012
Messages
10
Reaction score
2
Location
VA
Rating - 0%
0   0   0
Contact seller
Thank you to everyone that replied. Looks like I've found what I needed.

I'm going to go check out some that moparfan68 has.

Thank you,

----------------------------------------------------------
I am looking for a good 440 block, short block or even a rebuildable 440 in or very close to VA

Seems all the ones I find in VA people think are Gold and all the good priced ones are too far away.

Edit: I'm plan on building a high-torque stroker engine for a 4-wheel drive truck that I use daily also for towing, hauling, off-roading, etc...

I am also interested in a BB 727 trans housing

Thank you,
Shawn
 
I have a 440 stock bore with 11to1 pistons and a 509 cam with 35passes at the track.(short block only)I would not be afrade to put heads back on it and run.but what do you call a good price.......Artie
 
Thanks for the reply.

My goal is to build a high-torque, low RPM stroker for my 4x4 truck which is also my daily driver.

I've been seeing stock bored blocks for 250-450 on here, MoParts, etc which is within my price range for a block.

While I would probably like your block; the pistons, cam, etc would not be useful for my needs.

I think I should update my ad to indicate my goals.

Thanks again,
Shawn
 
I have a 500 mega block can be used with wedge or stage V hemi heads has motor mount bosses for Hemi or wedge. inter locking billet mains.. high Nickle. Make an offer
 

Oldmanmopar said:
I have a 500 mega block can be used with wedge or stage V hemi heads has motor mount bosses for Hemi or wedge. inter locking billet mains.. high Nickle. Make an offer
Click to expand...

I don't know that much other than what I've read about issues with the early Mega Blocks. Do you know who\when this one was cast? Have any pictures?

Thank you,
 
Status
Not open for further replies.
-
Back
Top Bottom